高可靠性隔離電流采樣ADC FT-AV-SI1306

FT-AV-SI1306是一款高性能Σ-Δ調制器,基于電容隔離技術,其輸出與輸入分離。該器件的線性差分輸入信號范圍為±50mV(滿量程±64mV)或±250mV范圍(滿量程±320mV)。差分輸入非常適合需要隔離的高壓應用中基于分流電阻的電流檢測。

模擬輸入經過放大,并由二階Σ-Δ調制器連續采樣,然后轉換為高速,單比特?cái)?shù)據流。輸出數據與外部時鐘同步,時鐘上升沿有效,頻率范圍為5MHz至21MHz。通過使用適當?shù)臄?shù)字濾波器(例如sinc3濾波器)來抽取比特流,該器件可以在78.125KPS的條件下以20MHz的主時鐘實現16位分辨率和86dB/82.5dB信噪比(SNR)。故障安全功能包括輸入共模過壓檢測和VDD1缺失檢測,簡化了系統設計和診斷。

產品特性

● 高達5000Vrms的絕緣電壓

● 時鐘頻率:5MHz至21MHz

● ±50mV或±250mV線性輸入電壓范圍

● 出色的直流性能:

● 失調誤差:±50μV或±100μV(最大值)

● 失調漂移:±0.5μV/℃或-0.5~1.5μV/℃(最大值)

● 增益誤差:±0.2%(最大值)

● 增益漂移:±40ppm/℃(最大)

● 信噪比:82.5dB或86dB(Typ)

● 高CMTI:150kV/us(典型值)

● 系統級診斷功能:

● AVDD監控

● 輸入共模過壓檢測

● 工作溫度:-40℃?125℃

● 封裝:SOP8(300mil)/SOP16(300mil)

?

安全認證

● UL1577認證: 1分鐘 5kVrms

● CQC認證:符合GB4943.1-2011

● CSA認證:組件符合5A

● VDE認證:DIN V VDE V 0884-11:2017-01

?

應用場景

● 分流電流監控

● 交流電機控制

● 電力和太陽能逆變器

● 不間斷電源供應

● 車載充電器

?

?

?

?

?

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

推薦產品